There are a few common problems we need to explore:
- Bluetooth headphones won't connect to Mac right out of the box — some configuring is needed
- Pairing Bluetooth headphones with Mac is different from pairing them with iPhone or your car’s audio system
- Special settings that answer questions like how to connect two Bluetooth headphones to one Mac and how to use multiple audio outputs
Throughout the article, AirPods would be used as an example, but any other model of Bluetooth headphones can be connected in a similar fashion.
How to pair wireless headphones to Mac
Connecting Bluetooth headphones to Mac for the first time is done by following a few easy steps:
- On your Mac, click on the Apple menu and launch System Preferences
- Navigate to the Bluetooth menu and Turn Bluetooth On. You should now see all available Bluetooth devices around you.
- Make sure your headphones are charged and currently in discoverable mode. Click Connect to establish a new connection
- Your Bluetooth headphones should now appear in the list. Click Connect to establish a new connection.
- If you’re trying to reconnect your existing device, right-click on it and choose Connect
After you’ve managed to successfully connect Bluetooth headphones to Mac for the first time, they should stay connected or reconnect automatically when you leave the Bluetooth range (around 33 feet or 10 meters) and come back.
You can also calibrate headphones to your liking through the Sound menu in System Preferences. For example, in the Output tab you can choose to “Show volume in menu bar” and set a stereo balance between right and left.
Oftentimes things don’t go as planned, so let’s work through some widespread issues regarding Bluetooth headphones.
How to connect AirPods to Mac
We’ll start with the easiest method: install AirBuddy and pair AirPods with Mac using a handy pairing screen (similar to the one you get on iOS). All it takes is bringing your AirPods close to your Mac and opening the lid. Then, you’ll see a screen like this:
From there, it’s pretty straightforward. Hit the “Click to connect” button and that’s it. The beauty of AirBuddy is that you don’t have to dive into any settings to pair your device.
If you don’t have AirBuddy, you can rely on Apple’s native connection flow.
Here’s how you connect new AirPods to Mac:
- Open System Preferences on your Mac and select Bluetooth.
- Ensure Bluetooth is turned on.
- On AirPods, press and hold the round button (it’s at the bottom center of the case) until the white light starts blinking.
- Your Bluetooth headphones should now appear in the list.
In case you’ve already paired AirPods with your iPhone that’s tied to the same iCloud account and Apple ID, your earbuds will be automatically recognized by Mac.
If you want an easy tool for pairing multiple headphones simultaneously, install ToothFairy. You can set up custom icons for different headphones so they’re easy to recognize. To connect, simply click on the icon. You can read more about how to use the app below.
How to fix Bluetooth headphone issues
Sometimes going through the setup steps doesn’t result in your headphones connecting successfully, or connecting and then abruptly disconnecting. This is profoundly annoying but can be solved by either resetting the headphones or purging preference settings on your Mac. Here's how to fix all known issues:
Restart your Bluetooth headphones
In case you can’t connect your Bluetooth headphones not only to your Mac but also any other device you own (iPhone or car audio), it might be a glitch in its settings, so a simple reset should remedy the situation.
For reset instructions, check your device’s manual. Here’s how to reset AirPods:
- Put the earpieces into the case and keep the lid open
- Press and hold the setup button until the light switches from amber to white (around 10 seconds)
Now all settings on your earphones should be reset and you should be able to connect them again using the standard workflow above. If the problem persists, it could be something to do with the preferences on your Mac.
Reset sounds preferences on Mac
First, make sure that your Mac is running macOS Sierra or newer (macOS High Sierra or Mojave). If not, upgrade to the latest version by going to System Preferences > Software Update or using the App Store if you’re upgrading from a few versions back.
Next, if nothing was of any benefit so far, try resetting your Mac’s sound preferences. To do that:
- From the menu bar select Go > Go to Folder… and type ~/Library/Preferences
- In the long list of preference files, find and delete the following: com.apple.preferences.plist and com.apple.soundpref.plist
Deleting preferences out of the library forces your Mac to recreate them brand new, thus avoiding any bugs or improper algorithms that could have interfered with your Bluetooth headphones setup. If that didn’t work, you can also try relaunching the audio process:
- Launch Activity Monitor from the Applications folder
- In the CPU tab, find the process called coreaudiod
- Quit the process and close Activity Monitor
The above would force not only the preferences for your audio to reset but also the audio process for your whole Mac to relaunch.
No audio from a paired and connected Bluetooth headset
Occasionally, when you succeeded in connecting Bluetooth headphones to Mac, you might hear no sound going through. There are a few things you can do to solve this.
Ensure that your headphones are the selected audio output for your Mac:
- Go System Preferences > Sound
- In the Output tab, find your headphones in the list and double-click to make them active
If that didn’t change anything:
- Reset your headphones as per the directions above
- Go System Preferences > Bluetooth
- Right-click on your headphones, choose Remove, and confirm
Now you need to connect Bluetooth headphones to Mac all over again, and the problem should disappear.
Can’t connect two Bluetooth headphones Mac recognizes
The beauty of Mac’s Bluetooth menu is that it lets you add any number of Bluetooth-enabled devices, from keyboards to headphones. Sometimes, however, it might malfunction and not allow you to add two wireless headphones at the same time.
To fix this issue, essentially repeat the steps from the previous section:
- Reset each pair of headphones
- Remove them from Mac’s Bluetooth menu
- Reconnect your headphones once more
If, however, you’re looking for how to use multiple audio outputs, such as headphones, at the same time — here some magic tricks are required.
How to use multiple audio outputs simultaneously
Most Mac users believe that they can only play their audio output through one device at a time, be it internal speakers, Bluetooth headphones, or some other amplifier. But in reality it’s possible to play audio on multiple devices at the same time through a handy built-in utility called Audio MIDI Setup. Here’s what you need to do:
- Launch Audio MIDI Setup through Applications
- Click the plus icon at the bottom left and choose Create Multi-Output Device
- In the new option that appears, check all the Bluetooth devices you need to play simultaneously
- Navigate to the Sound menu in System Preferences and choose the Multi-Output Device in the Output tab. Now all sounds will play through both devices at the same time.
Playing audio through multiple devices is a nifty trick for when you need more sound power for your party or when trying to create a true surround sound for a movie screening.
Use master Bluetooth software for all needs
Most of the time, audio on Mac is not an issue. What’s frustrating is the way current settings are sprinkled all over macOS. Lots of fixes described here might seem confusing and unintuitive at first sight. You might wish there was an app that would make it easy to control all your audio needs from a single place.
And there is not just one such app, but two!
As we’ve mentioned, we love AirBuddy, an app that brings the ease of headphones pairing from iOS to macOS. As long as you’re logged in your iCloud account, you don’t have to do any manual pairing, just bring your headphones close to Mac and click “Connect.”
Another useful helper is ToothFairy — the most simple Bluetooth device assistant for setting up multiple headphones connections.
To set up a new device in ToothFairy, all you need to do is:
- Open the app
- Click the plus icon
- Locate your device in the list and click Connect
Similarly, it’s just as easy to assign custom icons to all your frequently used devices and get them displayed in the menu bar, so you instantly know which devices are connected, what’s their battery life, and can quickly turn them on and off with one click.
Additionally, ToothFairy offers a unique option of improving the sound quality of your Bluetooth headphones by funneling the sound through a higher level audio codec.
In the end, it seems like wireless headphones are here to stay. So finding a master program to control them with ease is going to save your hours of time in the long run. Use the tips above to configure your headphones, easily connect AirPods to MacBook, and take advantage of AirBuddy and ToothFairy for best results.
How to disconnect Bluetooth headphones from a Mac
To disconnect your headphones from your Mac, you only need to perform two steps.
- Click the Bluetooth icon in your Menu bar.
- Find your headphones on the list of the connected Bluetooth devices and click the blue icon next to the name to disconnect:
You can also disconnect via System Preferences. This method can be your go-to if you don’t want to have the Bluetooth icon in your Menu bar.
Just like when you connect wireless headphones to MacBook, you have to go to the Apple menu > System Preferences… > Bluetooth and find your headphones on the list of the connected Bluetooth devices there, then two-finger click on the item you want to disconnect and select Disconnect in the drop-down menu.
Alternatively, you can turn off Bluetooth with the toggle, which will automatically disconnect all of your connected Bluetooth devices.
How to connect your Bluetooth headphones via Control Center (Big Sur and later)
Control Center was introduced with macOS Big Sur, so you might not realize that you can actually connect your Bluetooth devices there.
Here’s how to connect earbuds or headphones to MacBook if you are running macOS Big Sur or fresher.
- Click the Control Center icon at the right side of your Menu bar (it looks like two toggle bars — one off, and the other on).
- Turn on Bluetooth by clicking the respective icon on the left of the word Bluetooth and wait for it to turn blue to signify that Bluetooth is on.
- Next, click on the word Bluetooth to open the Bluetooth menu and find your headphones on the list (your Bluetooth headphones need to be on and in the discoverable mode for this to work). Click on them to connect.
Best of all, AirBuddy and ToothFairy are available for a free trial through Setapp, a platform of over 200 useful utilities and apps for people who love finding the best shortcuts for using their Macs. Now enjoy the sound!